Mainline Dynolog Dynamometers

Welcome to the home of Mainline DynoLog Dynamometers, or "Mainline Dyno" for short ! Our systems represent a distinct, and unsurpassed, step forward in dynamometer technology...

Read More

Twitter Stream


JD RACING - Daniel Falzon 

JD Racing discusses how their Mainline DynoLog Dynamometers Motorcycle Chassis Dyno has been a key part of their team's racing achievements. Daniel Falzon was the the Australian Supersport Champion in 2013 and 2014, and claimed 2nd place in the 2015 ASBK - Australian Superbikes Championship, in his maiden year on their Yamaha Superbike. The JD Racing team exclusively use a Mainline Motorcycle Chassis Dyno to tune all of their race bikes.



Tony Palo - T1 Race Developments 

Tony Palo from T1 Race tells us how Mainline DynoLog's Pro Hub 4000 hub dyno has changed the face of R35 GTR tuning for his company. 




Ben Strader - EFI UNiversity

Ben's take on the Mainline Water Brake Engine Dyno!




Brad Harris - Enhanced Automotive

If anyone is in the market for a dyno, you cant beat Mainline DynoLog, the Mainline team have the best customer service and dynos on the market.
I've had my Mainline Dyno for approx 8 years now and only 2-3 times something has failed, I jump on the phone, and instantly the fault is diagnosed and either a fix over the phone or overnight air bag is sent. I've dealt with many different brand dyno's over the years, and no other brand can offer the reliability and support Mainline offer.

Thanks again Mainline !


Rob Herrod - Herrod Motorsport

When Herrod Motorsport became the Australian distributor for the SCT tuning software, we looked no further than the Mainline / DynoLog chassis dynamometers for our new in-house Awd chassis dyno & testing facility.

The Mainline / DynoLog AWD 1500 provides Herrod Motorsport with the most current & up to date data OBD-II & ECU logging for an advanced data graphing and advanced analytical functions.

Our Mainline / DynoLog dyno has also been equipped with 16 thermocouples for testing and achieving a more precise and accurate information & data in the testing of high horsepower Turbo charged and supercharger vehicle applications.

Our latest inclusion to our AWD 1500 dyno has been the addition of the 5 Gas analyzer with the Emissions Drive Cycle test module to perform drive cycle tests using IM240 standards.

The professionalism of the Mainline DynoLog team in their service & availability, at times being only just a phone call away, and there is never a question that has been left unanswered or a request not dealt with in a quick and precise answer.

The only choice for a dyno IS the Mainline DynoLog Dynamometer. No other product comes near it for consistency!


Craig Shiraz - Got Boost UK

We purchased our Mainline Dynolog 2WD500 second hand from another tuner in another country. After extensive research into the best possible solution to replace our Dastek machine, Mainline kept coming out on top from everyone that we spoke to, and after a brief email to the guys at Mainline we were sold. 

Our main concern was customer support, as our last supplier was little help when we had issues. Fortunately we needn't have worried, the  team at Mainline have been unbelievable in every aspect, and we are more than thrilled with our Mainline Dyno which has performed flawlessly since being commissioned.

I cannot recommend Mainline, their Team and the products enough. If anyone in the UK wants a demo feel free to get in touch.


Martin Donnon - Willall Racing

To whom it may concern,

We have been operating a high end tuning business – Willall Racing - in South Australia for the past 15 years, and in this time we have had much experience with chassis dynos having purchased our original unit back in 2003. It was in 2009 though that we took the step of upgrading to a Mainline chassis dyno, first as a two wheel drive twin retarder unit, and then expanding it to a complete AWD system in 2010.

Our reasons for choosing the Mainline dyno, which have since been backed up with our experience with the product, were various, and are listed here in no particular order.

  • Product support and backup is key for the operation of our business, and Mainline have supplied this without fail
  • The ability to have custom requirements and software written by Mainline to incorporate some advanced tuning features
  • Being able to precisely, accurately, and most importantly – repeatably – measure power and torque outputs
  • To be able to search and index customer files in a timely and organised fashion

We are now several years down the track using the Mainline product and in each and every requirement it has achieved if not surpassed our expectation. There is really not much left to say after this other than if we were faced with making the same choice again, we would do nothing different.


Brett West - Adelaide Performance Engineers

The decision to replace our dyno was perhaps one of the largest business decisions we could have made at the time and after 4 years of research, what seemed like such a cost soon became the best business direction possible.

Knowing that any product is only as good as the support it receives and already having experienced discontent from a high profile brand, we directed our research to this aspect.

This was best done by speaking with those using the different products and it soon became clear that Mainline were just so far ahead with a benchmark 100% satisfaction score from its users!

Extensive research found the Mainline system to be head and shoulders above anything available We were very satisfied with its ability for it to be future proof, adapting easily to the rapid technology advances of vehicles so the purchase direction was a no brainer but what of our success with it?

Our staff recruiting, satisfaction and retention could be seen as directly attributed to their continually expanding knowledge using it . This attitude has spread throughout the work place, creating an electric atmosphere of professionalism and pride which in turn has significantly enhanced our customer base with quality clients and expanded our markets positively.

Diagnosis is now so quick & profitable,  as our Mainline has reliably given us the ability to easily measure and diagnose what was previously invisible.

Sales of fuel pumps, air flow meters, injectors, ignition parts, exhaust cat converters etc are just as simple as showing clients a graph with FAIL written on the poor result, overlaying a good example air flow meter or fuel pump or just about anything you care to measure.

In summary, the support of Mainline and their dedication to ensuring our business success has been of value many times the cost outlaid. It is simply our best financial business decision ever made.


Brett Simmonds - LSX Garage

I am writing to let you know how happy we are with our Mainline/DynoLog 2wd chassis dyno. I have been working as a tuner in the performance and aftermarket industry since late 2000 and in the motor industry since 1996. During my time as a tuner I have used all types of chassis dynamometers.

I have never had the same attention, and support, provided by any other company during our transition from a basic dyno, and software, to the Mainline/DynoLog precision data acquisition software. I never feel as though I have out grown the software.

Only the Mainline/DynoLog chassis dynamometer has given me the ability to perfect my tuning by providing such features as RPM tables, fuel correction graphs, and desired AFR tables (both simple and AFR vs MAP).

Repeatability is second to none, and I no longer feel I have to doubt the chassis dyno I am using, or phone tech support and wait half a day for an answer like “something on the car has changed, that’s why the power is different.”

We have several race teams who have switched to our mainetance and development program, which incorporates the use of our Mainline/DynoLog chassis dynamometer, to obtain every last bit of power for a very restricted class. The Mainline/DynoLog software has given us the ability to review alterations ,and see exactly where we have made gains. The vast array of channel logging is what we believe gives us the edge over others.

Once again thank you for all your support.


Brett Simmonds


Jim Economou - DART Automotive

I was one of the first to buy a Mainline AWD dyno back in 2005 when everyone was telling me buy the competitors dyno. I can honestly say after nine years, no regrets, no issues and excellent support. 

Bradley Challacombe - Insane Performance

Great product, outstanding service, brilliant customer support and stand up guys. Thank you.

Like Us On Facebook

Upcoming Events

Mainline 2021 PROHUB 100 USA Post 1
We are pleased to announce reaching a major company, and product, milestone with ProHub Dyno sales now surpassing 100 units exported to the United States. 
We would like to thank all our US based clients for their patronage, and for choosing our ProHub products, over all others, for their performance and business needs. 
We look forward to many more units being sent across the Pacific to new homes in the USA in the years to come.