Portable ProHub Chassis Dynamometers

Portable ProHub Chassis Dynamometers

“Ultimate In-Chassis Tuning Solution”

The Mainline DynoLog Portable ProHub Chassis Dynamometers are the ultimate “in chassis” tuning solution for ultra-performance street and strip vehicle applications. Designed for testing extreme street or drag cars, the ProHub chassis dynamometers bridge the gap between an engine dynamometer and a roller-based chassis dynamometer.

The Portable ProHub Chassis Dyno system provides an effectivrcig e “in chassis” tuning solution, without the need to remove the engine, or to hire a drag strip facility. Both these tuning options require a significant amount of time, money, and effort to be able to achieve practical results. In some cases, even an engine dynamometer cannot cope with the power and torque levels produced by such engines, and a traditional roller-based chassis dyno, which relies on the tyre to roller interface (traction), is simply out of the question.

The Portable ProHub Chassis Dynamometers are available in 2000hp or 3000hp models, are quick to setup, easy to move around your shop, or can be stored away when not in use.
ProHub 3000P Premium Chassis Dynamometer

 

The Portable ProHub Dynamometer connects directly to the vehicle's axle hubs, via billet steel adaptors, effectively removing wheel and tyre related variables from the testing and tuning equation, for absolute accuracy, and the ultimate in test data repeatability from power run to power run.The Portable ProHub Dynamometer connects directly to the vehicle's axle hubs, via billet steel adaptors, effectively removing wheel and tyre related variables from the testing and tuning equation, for absolute accuracy, and the ultimate in test data repeatability from power run to power run.

Axle Hub Comnnection     Portable ProHub PAM Torque Arm
All ProHub models are maximum speed rated up to 3600 axle rpm or equivalent road speeds of up to 310 mph (500 kmph) subject to vehicle gearing.The “Power Absorption Modules” (PAMS) on the 2000hp & 3000hp models have integrated wheel assemblies allowing them to be easily moved to the vehicle, correctly aligned and quickly connected to the vehicle’s axle hubs.After testing is completed, the PAMS can be rolled away and stored when not in use.

ProHub Camber Angle Small   AXLE CONNECTION

Portable ProHub dynamometers will accommodate up to +/- 10 °camber and 10 ° toe in /out, to accommodate live axle and IRS systems.

ProHub Rear Shot

Applications for the ProHub dynamometers include performance tuning, ignition timing perfection, pre-race testing, driveline torque testing, clutch evaluation, stall convertor mapping, multiple stage nitrous injection testing, and performance product research and development. The ProHub Chassis Dynamometer can also be setup as a very cost-effective engine testing solution, in comparison to setting up a complete engine dynamometer facility.