ProHub - 4 AWD Chassis Dynamometers

AWD Chassis Dynamometers 

The Mainline DynoLog ProHub - 4 AWD Chassis Dynamometers are the ultimate AWD “In Chassis” Tuning solution for high performance AWD & 2WD vehicle applications.

Designed for testing high performance street cars and some drag car applications, the ProHub AWD Chassis Dynamometers effectively bridges the gap between an engine dynamometer and a roller-based chassis dynamometer ,which rely heavily on the tyre to roller interface (traction).

The ProHub AWD Chassis Dynamometers are available in 3200hp (1600Hp Front & Rear), 3600hp (1600hp Front - 2000hp Rear) or 4600hp (1600hp Front - 3000hp Rear) model configurations.

These units are quick to setup, easy to move around your shop, and can be stored away when not required for use. The Power Absorptions Modules (PAMS) can be disconnected from the cabinet without hand tools.

The Portable ProHub Dynamometer connects directly to the vehicle's axle hubs, via billet steel adaptors, effectively removing wheel and tyre related variables from the testing and tuning equation, for absolute accuracy, and the ultimate in test data repeatability from power run to power run.The Portable ProHub Dynamometer connects directly to the vehicle's axle hubs, via billet steel adaptors, effectively removing wheel and tyre related variables from the testing and tuning equation, for absolute accuracy, and the ultimate in test data repeatability from power run to power run.

Axle Hub Comnnection     
All ProHub models are maximum speed rated up to 3600 axle rpm or equivalent road speeds of up to 310 mph (500 kmph) subject to vehicle gearing.

The “Power Absorption Modules” (PAMS) on the AWD models have integrated wheel assemblies allowing them to be easily moved to the vehicle, correctly aligned and quickly connected to the vehicle’s axle hubs           
Portable ProHub PAM Torque Arm

 

 

 

 

 

The ProHub AWD Chassis Dynamometer will accommodate up to +/- 10 °camber and 10 ° toe in /out, to accommodate live axle and IRS systems. 

ProHub Camber Angle Small

 

Applications for the ProHub AWD Chassis Dynamometers include performance tuning,   ignition timing perfection, pre-race testing, driveline torque testing, clutch evaluation, stall   convertor mapping, multiple stage nitrous injection testing, and performance product   research and development.

FWD ProHub

 

 

 

 

 

 

 

The ProHub AWD Chassis Dynamometer can be setup for RWD, FWD or AWD vehicle testing configurations as required.    

ProHub Rear Shot